Fiberglass door stain options — woodgrain finishes

Fiberglass Doors

Fiberglass Door Stain Options

13 woodgrain stain finishes for Richerson and Mennie fiberglass slabs. Pick your stain colour — we'll match it on your door.

Woodgrain Stain Collection

13 Fiberglass Door Stain Finishes

Stain colours are applied to woodgrain-textured fiberglass slabs (oak, mahogany, teak) for an authentic stained-wood look without the maintenance of real wood.

What you're looking at

Real wood-grain, factory-stained

Every stain on this page is applied to a compression-moulded fiberglass slab from Richerson or Mennie. The skins are cast from real oak, mahogany or teak boards, so the stain sinks into the grain the same way it would on a wood door — you get the depth and movement of a stained-wood entry without the warping, cracking, swelling or annual refinishing.

Choosing for your home

Match the stain to your exterior

Red and buff brick across the GTA pairs naturally with Medium Oak, Chestnut and Mahogany. Light siding, stucco and limestone work with Dark Walnut, Espresso and Weathered Grey. North-facing entries and covered porches read 1–2 shades darker than the chip — go lighter than you think. South- and west-facing doors read lighter — go a shade darker.

Ontario maintenance

Built for our winters

Wash twice a year with mild soap and water. Check the weather stripping each spring. The factory UV-protected finish does not need annual sanding, re-staining or varnishing — the only maintenance a fiberglass stain needs is the wash itself. South- and west-facing doors fully exposed to sun may want a clear-coat refresh after 7–10 years; we'll flag your exposure at the in-home visit.

Finish-by-finish guide

Every stain, what it looks like, where it works in Ontario

  • 01 · Natural Oak (light honey) Pale golden tone that lets the oak grain read clearly. Ideal for: Bright entries, scandi and farmhouse fronts, north-facing porches where you want more light.
  • 02 · Golden Pine (warm amber) Soft amber with a faint orange cast across the grain. Ideal for: Cottage, craftsman and country-style homes with beige or stone cladding.
  • 03 · Honey Maple (mid honey) Even honey colour, low contrast between grain and base. Ideal for: Bungalows and split-level homes with warm brick or stucco.
  • 04 · Light Walnut (warm tan) Tan-brown with subtle red undertones in the grain. Ideal for: Traditional GTA two-storey homes with red or buff brick.
  • 05 · Medium Oak (mid brown) Classic mid-brown oak — the most popular stain in Ontario. Ideal for: Any brick or stone exterior; pairs with black or oil-rubbed bronze hardware.
  • 06 · Chestnut (reddish brown) Warm reddish-brown with deeper grain lines. Ideal for: Heritage and century homes, red brick and earth-tone exteriors.
  • 07 · Cherry (red mahogany) Rich red mahogany tone with a glossy depth. Ideal for: Formal entries, executive homes, dark trim and white columns.
  • 08 · Dark Walnut (deep brown) Deep chocolate-brown with pronounced grain definition. Ideal for: Modern and transitional homes with light siding or limestone.
  • 09 · Mahogany (burgundy brown) Burgundy-brown with rich reddish depth in direct sun. Ideal for: Colonial, Georgian and luxury fronts; pairs with brass or polished nickel.
  • 10 · Espresso (very dark brown) Near-black brown that reads almost solid at a distance. Ideal for: Contemporary builds, dark window frames, sleek modern entries.
  • 11 · Black Walnut (near black) Deepest stain on offer — dramatic, sharp, modern. Ideal for: Modern farmhouse, all-black trim packages, west-facing porches.
  • 12 · Weathered Grey (cool grey-brown) Driftwood grey with a soft brown undertone. Ideal for: Coastal-look homes, white or grey siding, modern minimalist fronts.
  • 13 · Custom Match (your colour) We colour-match an existing trim, door, or sample you provide. Ideal for: Replacements that need to blend with an unchanged second door, garage door or trim.

Explore Your Options

Like a stain? Get your custom fiberglass door quote today.

Tell us the stain number you liked. We'll bring physical stain samples to your home — measure, quote and lock in lifetime warranty pricing. No pressure, no obligation.

FAQ

Fiberglass Door Stain FAQs

During an in-home visit, our advisor can bring physical stain chips and matching slab pieces to help you choose the right finish. We don't ship stain chips by mail — colour reads differently under store and indoor light, and we want you to see the finish on real fiberglass woodgrain before you decide.
Stains are factory-applied to woodgrain-textured fiberglass slabs (Richerson or Mennie) under controlled conditions, so the finished door matches the sample chip within a normal wood-stain tolerance. Slight variation can occur because fiberglass grain depth differs from the chip, and natural light changes the read across the day. For exact matches to an existing door, ask for our Custom Match service — we colour-match from a physical sample you provide.
Standard stained Richerson and Mennie fiberglass doors typically run 4–6 weeks from approved measure to installation. Custom Match stains, oversized slabs, sidelites, transoms, or specialty doorglass can extend the timeline to 6–8 weeks. We confirm the exact ETA in writing on your quote and schedule installation only after the door is built and inspected at our facility.
Wash the door twice a year (spring and fall) with mild soap and water, dry it, and inspect the weather stripping and threshold seal. The factory-applied stain is UV-protected and rated for Canadian climate — there is no annual re-sanding or re-staining like a real wood door. South- and west-facing doors with no porch overhang may benefit from a light clear-coat refresh every 7–10 years; we'll flag this at your consultation if your exposure warrants it.
Trust Build stains use UV-inhibited finishes formulated for exterior fiberglass, so fade is minimal in normal Ontario exposure. Doors fully exposed to direct afternoon sun (typically west- or south-west-facing with no porch cover) may show slight lightening on the darkest stains (Espresso, Black Walnut, Mahogany) over 10+ years. A storm door or covered entry effectively eliminates this.
The stain finish is covered under Trust Build's lifetime transferable warranty on the door, hardware and our workmanship — the same coverage as the slab itself. Manufacturer coverage from Richerson and Mennie also applies to the factory finish against peeling, cracking and delamination, and against thermal bow on the slab. If you sell the home, the warranty transfers to the new owner.
Yes. Fiberglass woodgrain slabs can be sanded lightly and re-stained or painted by a qualified refinisher. Most homeowners never do — but it's an option that doesn't exist on a steel door. If you're unsure between two stains, choose the lighter one; going darker later is straightforward, going lighter is not.
Yes. The 13 finishes on this page are wood-look stains. We also offer hundreds of solid paint colours on smooth pre-finished fiberglass slabs (white, black, custom paint match). Ask your advisor if you'd like to see the painted-finish option alongside the stain chips at your in-home visit.

Free Quote

Request your free, no-obligation quote

Tell us about your project. We'll be in touch within one business day with a detailed project assessment.

  • Detailed project assessment
  • Written itemized quotation
  • Product and installation recommendations
  • Financing options available

Get Your Free, No-Obligation Quote

Tell us a little about your project and we'll get back to you. Takes under a minute — no pressure, no pushy calls.

By requesting a quote you agree to be contacted about your request. We never share your info or send spam.

Join 8,700+ Ontario homeowners · Energy Star products · Lifetime transferable warranty