A gap of daylight along the bottom of an entry door can come from a worn door sweep that takes minutes to swap, or from a rotted sill that means replacing the frame. From inside, the two look identical. The repair, and the cost, are not. For East Gwillimbury homeowners, where an entry door goes through a full freeze-thaw cycle every year, knowing which problem you have is most of the decision.
Problems that are usually worth repairing
When the slab and frame are in good shape, these are normally repair jobs:
- Worn weatherstripping and door sweep. Compressed or cracked seals are a common source of drafts. Replacing them restores the seal without touching the door.
- Sagging hinges. A door that rubs at the top corner on the latch side often has hinge screws that have loosened in the jamb. Longer screws that reach the framing behind the jamb can pull it back into position.
- A latch that no longer catches. If the bolt does not line up with the strike plate, the plate can often be repositioned or the hardware adjusted.
- A worn or stiff lock. Lock cylinders and handle sets can be replaced on their own.
- Surface damage. Small dents or scratches on a steel door, and surface scratches on a fiberglass skin, can often be filled and refinished.
Signs the door is past repairing
Some problems come from the structure, not from the parts attached to it:
- A soft or rotted frame or sill. Press a screwdriver tip into the bottom of the jamb and the sill. If it sinks in, water has reached the wood, and new weatherstripping will not stop the damage.
- A warped slab. If the door meets the weatherstripping in one spot and leaves a gap in another, hinge adjustments will not fix it, and the gap often shifts with the seasons.
- Rust through the bottom edge of a steel door, or a cracked skin on a fiberglass door, where water has reached the core.
- Fogged or cracked glass in a door lite or sidelite. That is a failed sealed unit, and on an older door it can be more practical to replace the whole door.
- An uneven gap around the perimeter. A wide gap on one side and a tight one on the other usually means the frame has shifted out of square. Hinge work alone may only hide it.
A ten-minute check before you call anyone
- Daylight test. Close the door on a bright day, or shine a flashlight along the edges from outside at night, and look from inside. Light shows where the seal fails.
- Gap check. Look at the gap between slab and frame at the top, middle and bottom on both sides. Even gaps point to hardware. Uneven gaps point to a frame that has moved.
- Screwdriver test. Probe the bottom of the frame and the sill for soft spots.
- Sticking test. Sticking only in humid summer weather points to swelling, which a hinge adjustment or a lightly planed edge may handle. Sticking all year points to structure.
- Take photos of each trouble spot. Clear photos make an assessment faster.
Repair, slab-only replacement, or the full system?
There are three realistic paths. Repair fits when the slab and frame are sound. Replacing only the slab can work when the frame is square, dry and solid. A full entry door replacement, with slab, frame, weatherstripping and threshold replaced together, is the right answer when the frame or sill is damaged, because a new door hung in a bad frame inherits the same leak.
If you are weighing replacement, our breakdown of what entry door installation costs in Ontario shows how door type, hardware and configuration move the price.
What to look for in a replacement
Fiberglass or steel. Fiberglass doors resist dents, rust and warping, and they handle freeze-thaw swings with little upkeep. Steel doors are strong and economical, but a scratched finish needs attention before moisture gets in. Look for ENERGY STAR certification on whichever you choose.
Locking. A Ferco multi-point lock secures a fiberglass, steel or French garden door at several points along the frame instead of one. Our multi-point door lock guide explains how it works. A Tedee smart lock is an optional add-on, not a default.
Code basics. Under the Ontario Building Code (Article 9.7.2.1), the main entrance needs a door viewer, transparent glazing or a sidelight. That is worth planning for if your current door is a solid slab.
Frequently asked questions
How do I know if my front door needs repair or replacement?
Check the frame first. If the slab is sound and the frame is square and dry, hardware and seal repairs usually solve the problem. A soft sill, a warped slab, or a frame that has moved out of square points to replacement.
Can the door slab be replaced while keeping the existing frame?
Yes, when the frame is square, solid and free of rot. If the sill or jamb is damaged, replacing the slab alone leaves the leak in place, so the full system is the better choice.
Getting a clear answer on your door
If your door fails more than one of the checks above, request a quote on entry door replacement and send photos of the gaps and the sill. We repair and replace entry doors, and clear photos of the gaps and the sill are usually enough to tell which one yours needs. If a neighbour or family member nearby is dealing with a door like this, you can pass them along through our referral program.






